Deep Penetrating Concrete Preserver

PRODUCT DESCRIPTION
Lovitt's Deep Bond (Deep Penetrating Sealer) is a chemically reactive penetrating masonry sealer.

Lovitt's Deep Bond as a concrete sealant outlasts and outperforms all other concrete sealant products on the market.

Lovitt's Deep Bond is not a surface sealant, but, an internal concrete sealant.

Lovitt's Deep Bond contains a proprietary catalyst which "pursues moisture" in concrete, and upon contact reacts with the "free" alkali (lime) and calcium hydroxides (already in concrete or masonry) to form a silica gel on the surface of voids and particulate, impregnating the entire depth penetrated. This gel hydrates into glass, turning the entire depth penetrated into a solid mass.

This internal, permanent seal and water barrier also hardens the surface while increasing the compressive and flexural strength. For a more detailed, comprehensive explanation of the many unique benefits of using Lovitt's Deep Bond.

ADVANTAGES

Lovitt's Deep Bond outlasts and outperforms all other sealants on the market.

Lovitt's Deep Bond is nontoxic.
Lovitt's Deep Bond does not alter or affect the color or texture of the treated surface.
Lovitt's Deep Bond seals the concrete mass, which retards penetration of grease, oils, and acids.
Lovitt's Deep Bond increases bonding of any top coating (including paint, mastics, etc.) by 300%.
Lovitt's Deep Bond retards pitting, dusting and rutting.
Lovitt's Deep Bond cures new concrete uniformly and resists hair checking and spot drying.
Lovitt's Deep Bond densifies and hardens all concrete and masonry surfaces, greatly extending the life of treated surfaces by reducing or eliminating wear due to abrasion, freeze-thaw and salt attack.
Lovitt's Deep Bond enables easier removal of snow and ice.
Lovitt's Deep Bond may be painted over, and will accept concrete topping or mastics for floor tile, etc.

USES

All Portland Cement Concrete
All Concrete should be stabilized with Lovitt's Deep Bond
Shotcrete
Stucco
Mortar
Above, below or on grade as a slab hardener, preserving agent.

SPECIFICATIONS
Technical Details/Properties

Dilutent.....................................Use as supplied
Freeze Temperature...................32'F
Freeze Harm.............................None
Boiling Point.............................230'F
Coverage per Gallon..................150-200 sq. ft.
Shelf Life..................................Infinite
Solvent for Clean-up..................Water
Color........................................None
Odor........................................None
Toxicity....................................None - Nontoxic
Flammability.............................None
Fumes(during treatment)............None
Organic Properties....................Negligible
Environmental Hazards..............None
Polymerized Content.................Excellent

CAUTION
Do not allow Lovitt's Deep Bond to remain on glass! ETCHING OF THE GLASS WILL OCCUR. Clean Lovitt's Deep Bond off of glass immediately with water to prevent etching.

LIMITATIONS
Lovitt's Deep Bond should never be applied if the surface temperature is below or going to drop below freezing.
Lovitt's Deep Bond is not intended to be applied over painted surfaces, nor is it intended to seal visible cracks.
Lovitt's Deep Bond is best applied to damp, moist surfaces.

Disclaimer

MM Wood Restoration and Protection believe this information to be true to the best of our knowledge. Our products are of the highest quality and uniform within manufacturing tolerances.

Since no control is exercised over product use, no warranty, expressed or
implied, is made as to the suitability of products for a particular use or as
to the suitability of products for a particular use or as to the effect of such
use, and on liability is assumed, directly or indirectly.

Buyers and users are encouraged to conduct their own tests prior to
application.

Call Toll Free 877-966-3476 For Technical Questions or to Order Products